Policy icon

100% Z-Wave Certified

Designed to Work together.

Policy icon

Safe Payment

100% secure payment

Policy icon

Shop With Confidence

30 Day Return

Policy icon

24/7 Help Center

Dedicated 24/7 support

Controllers

Sensors

49.00

Fibaro Door & Window Sensor 2 Gen5

Fibaro Door & Window Sensor 2 Gen5
49.00

Fibaro Door & Window Sensor 2 Gen5

Fibaro Door & Window Sensor 2 Gen5
  • Detects window or door opening – increasing security
  • Monitor and control any room’s temperature – integrated temperature sensor
  • Compatible with any Z-Wave or Z-Wave Plus Controller
  • Detects tampering, when detached or opened
  • Visual LED indicator signaling status of the device
  • Easily fitted to any door, window, gate or blind
  • Z-Wave Plus Certified
65.00

Fibaro Motion Sensor Gen5

Fibaro Motion Sensor Gen5
  • PIR (motion), light level and temperature sensors and detects vibrations
  • Compatible with any Z-Wave or Z-Wave Plus Controller
  • Supports protected mode (Z-Wave network security mode) with AES-
    128 encryption
  • Tamper and low-battery alarm notification
  • Very small size makes it ideal for any Z-Wave system
  • Z-Wave Plus Certified
65.00

Qubino On/Off Thermostat

Qubino On/Off Thermostat

Z-Wave Qubino Flush Module Thermostat Plus enables an accurate management of your heating based on the temperature measured by the sensor supplied

  • Remote control for heating
  • Thermostat function
  • Communication 250% faster compared to standard Z-Wave devices
105.00

Popp CO Detector

Popp CO Detector

The Popp CO sensor controls air quality and warns when CO exceeds a defined limit. In case of an alarm the devices causes a loud sound (85dB/3m) and reports the alarm to the Z-Wave control center.

  • Integrated 10years lithium battery
  • Alarm sound with 85dB/3m
  • Easy-Press-Button for easy test and muting
  • Memory function informs about previous CO detection
  • Separate LED signal lights for power supply, alarm mode and error report
  • BS EN 50270:1999, BS EN 60335-1:1994, BS EN 50291:2010
  • Firmware update during use in field
  • Z-Wave Plus Certified
155.00

POPP Flow Stop Gas/Water shut-off controller

POPP Flow Stop Gas/Water shut-off controller
155.00

POPP Flow Stop Gas/Water shut-off controller

POPP Flow Stop Gas/Water shut-off controller
  • Leak-proof and durable, communiquant switch on Z-Wave
  • Includes valve controller, power supply and installation guide
  • Integrated in a Z-Wave system, it allows you to be notifié or cut a input water leak detection in case
  • The manual valve lever and remote control
55.00

Fibaro Flood Sensor Gen5

Fibaro Flood Sensor Gen5

The ultimate Z-Wave Flood, Temperature and Tilt sensor.

  • Detects water to alert for floods
  • Unique floating design
  • Tilt and Temperature sensors
  • Integrated siren and RGB LED indicator
  • Battery or VDC powered
  • Z-Wave Plus Certified
65.00

Qubino Flush PWM Thermostat

Qubino Flush PWM Thermostat

Z-Wave Qubino Flush PWM Thermostat Plus module with temperature sensor included for PID heating system control

  • PWM Thermostat Function
  • PID controller
  • Fits behind an existing switch
  • Communication 250% faster compared to standard Z-Wave devices
  • Very low power consumption less than 0.4W
  • Use to directly control a water or electric underfloor heating system, boiler, hot water pump, electric heater, etc
205.00

MCO Home PM2.5 Sensor Air Quality Monitor – 230V

MCO Home PM2.5 Sensor Air Quality Monitor – 230V
205.00

MCO Home PM2.5 Sensor Air Quality Monitor – 230V

MCO Home PM2.5 Sensor Air Quality Monitor – 230V

MCOHome PM2.5 Monitor is an air quality controller which is compatible with the Z-Wave technology. It is mainly used to monitor PM2.5 concentration but also monitors the indoor temperature and humidity

  • Monitor PM2.5 value in the air with high accuracy
  • Power supply: 230V
  • PM2.5 detection range: 0-999.9 ug/m3
  • Temperature range: -9.0~50 °C; Humidity range: 0%~99%RH
  • Z-Wave Plus Certified

Modules

65.00

Qubino On/Off Thermostat

Qubino On/Off Thermostat

Z-Wave Qubino Flush Module Thermostat Plus enables an accurate management of your heating based on the temperature measured by the sensor supplied

  • Remote control for heating
  • Thermostat function
  • Communication 250% faster compared to standard Z-Wave devices
49.00

TKB Home Wall Switch with Single Paddle

TKB Home Wall Switch with Single Paddle
49.00

TKB Home Wall Switch with Single Paddle

TKB Home Wall Switch with Single Paddle
  • Wall switch with integrated relay
  • Single switch button
  • Inclusive frame with rounded corners
  • Replaces complete wall switch
  • Relay with 6 A / 1,380 W / 230 V AC each
  • Integrated LED for indication on both paddles
  • Works with single and double click
  • Standby power consumption: <0.8 W
  • Wireless Technology: Z-Wave Plus
  • Dimensions: 80x80x38 mm
60.00

FIBARO Double Switch 2

FIBARO Double Switch 2

Double Switch 2 module to control two loads up to 1.5KW (6.5A) each.

  • Enables Z-Wave control of two independent lights or appliances
  • 6.5A per channel and 10A total load.
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
60.00

FIBARO Roller Shutter

FIBARO Roller Shutter
  • Compatible with any Z-Wave or Z-Wave+ Controller
  • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2
  • Authenticated with PRNG-based encryption
  • To be installed with roller blind motors with electronic or mechanical limit switches
  • Advanced microprocessor control
  • Active power and energy metering functionality
  • Works with various types of switches momentary, toggle and dedicated roller blind switches
  • To be installed in wall switch boxes
40.00

TKB Home Plug with Dim Function

TKB Home Plug with Dim Function
40.00

TKB Home Plug with Dim Function

TKB Home Plug with Dim Function

Remotely control and dim any lamp.

  • Works with any Z-Wave remote control and has manual override switch
  • Plugs right into any standard UK wall socket
  • Acts as a Z-Wave repeater – ensures maximum coverage of your Z-Wave network.
  • Z-Wave Plus Certified
60.00

Fibaro Single Switch 2 Gen5

Fibaro Single Switch 2 Gen5
  • Enable Z-Wave control of lights and appliances
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
  • DIY installation
  • User-friendly configuration menu
  • Smart notifications
59.00 55.00

Qubino Flush 1 Relay with Energy Meter (1*2,3 kW)

Qubino Flush 1 Relay with Energy Meter (1*2,3 kW)
59.00 55.00

Qubino Flush 1 Relay with Energy Meter (1*2,3 kW)

Qubino Flush 1 Relay with Energy Meter (1*2,3 kW)

Single Relay switch module to control loads up to 10A.

  • Enables Z-Wave control of lights and appliances
  • Monitors power consumption
  • Optional Temperature Sensor
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
  • DIY installation
  • Z-Wave Plus Certified
95.00

FIBARO Walli Roller Shutter

FIBARO Walli Roller Shutter

Fibaro Walli – Smart rollers, blinds and gates controller.

  • Control motors of roller shutters, venetian blinds, awnings, etc.
  • SceneControl
  • Power supply: 110 – 230V, 50/60Hz
  • Security: S2
  • SmartStart enable
  • Z-Wave Plus Certified

By continuing to use the site, you agree to the use of cookies. more information

Your choice regarding cookies on this site. This site uses cookies to store information. We use cookies to optimise site functionality and give you the best possible experience. Cookies. Some of these cookies are essential, while others help us to improve your experience. Our recommended settings include performace cookies. For more information visit our Privacy Statement Necessary Cookies. Necessary cookies enable core functionality and are required for the functionality of the site, also included are certain analytics data which is required by legitimate interest to combat fraud.please see our Privacy Statement.

Close